hot sell extrusion blow molding machine
The main technical parameters:
|Model||BT 280||Maximum capacity||5L|
|Screw diameter||65mm (38CrMoAla)||Screw heating power||12kw|
|Oil hydraulic pump power||5.5kw||Main motor power||11kw|
|Length to diameter ration(L/D)||25:1||Max. production diameter||180mm|
|Economic speed||130pcs/h||platen max. open width||500mm|
|Mold open width||230mm||platen open range||160-500|
|Mold size||325x350≥80||Platen side||460x350x50|
|Thickness of mold||160-280||Air blowing way||Blowing up on bottle|
|Air consumption||0.5-0.6m3min||Raw material||PE/PP|
|Cropping type||Hot cutting||Clamping force||50KN|
|Speed adjust type||Frequency control||Operating system||PLC|
1.This model is applied to PP, PE raw material plastic
products.mainly used for fruit bottles,pesticide bottle,drug
bottles,cosmetics bottle,oil bottle etc hollow plastic bottles.
2.The bottle size range:50-6000ml.
3.This machine adopted famous reducer and variable frequency, Japan
Omron proximity switch.
1. Our EBM machines are designed with suitable dimension to fit a container inner loading size, every foot is locked with 8mm wire loop and special hook to the pothook of container to avoid moving in transportation.
2. The naked metal surface is greased for rust protection; hydraulic oil and cooling water are drained off before packing; parison control valve and servo transducer are
dismantled to package separately; operation panel is covered with foaming board; water-proof plastic film covers the whole machine for humidity protection.
3. Moulds and auxiliary machines are packaged with 5-ply boxes separately, we use the small wooden boards to lock their position
to be nailed in container floor. Every thing will be loaded according to the loading layout sketch strictly.
1] Q:Are you a trading company or a manufactory? For example- blow
A: We own a factory ourselves, and we can assure the quality we
 Q: Where is your factory located?
A:our company is in Hebei province three hours’ driving from
Beijing airport to our company.
 Q: How about quality control in your factory?
A: “ Quality is the key point, do what customers need”
BAITONG machinery factory focuses on quality, quality control from
beginning to the end. Every piece of goods is tested strictly
before packing and delivery.
 Q: How about guarantee ?
A: One year guarantee.
 Q: Do you provide bottle blow mould and air compressor ?
A: Yes , we provide complete system and you will no need to find
the suitable air compressor and chiller...etc..
 Q: What is the language of the PLC and touch panel?
A: Don’t worry, we will translate the language in English, Spanish
or any other language, to make sure you will have an easy operation